• 您好,歡迎光臨中科聚峰機械有限公司網站! 主營自動攪拌車,攪拌一體車,自動上料攪拌車等各種規格的產品。

    自動上料攪拌車行業持續先行者!

    點擊撥打服務熱線:4008791999

    您的位置:首頁 - 新聞中心 > 行業資訊 >

    攪拌一體車攪拌軸停止轉動的原因

    發布時間:2022-10-21 來源:http://www.sarahpalintshirt.com/ 瀏覽量:

    概述:在生產過程中當出現攪拌一體車攪拌軸停止轉動或是轉動有點緩慢都是正?,F象,如果這種情況先停機檢查,看看有沒有出現下列三種情況: In t
    在生產過程中當出現攪拌一體車攪拌軸停止轉動或是轉動有點緩慢都是正?,F象,如果這種情況先停機檢查,看看有沒有出現下列三種情況:
    In the production process, it is normal that the mixing shaft of the mixer truck stops rotating or rotates slowly. If this happens, stop the machine first and check to see if the following three conditions occur:
    1、電機傳動皮帶有沒有出現松動的情況?自拌混凝土攪拌車電機傳動皮帶過松也能導致商品混凝土拌合機攪拌軸轉動緩慢或者停止轉動,電機傳動皮帶過松,導致傳遞的動力不足。
    1. Is the motor drive belt loose? The loose motor drive belt of self mixing concrete mixer can also cause the mixing shaft of commercial concrete mixer to rotate slowly or stop rotating, and the loose motor drive belt can cause insufficient power transmission.
    2、有沒有嚴重超載,自拌混凝土攪拌車攪拌軸如果超過正常工作負荷,會使攪拌軸轉動緩慢,若負荷過大,就會導致攪拌軸停轉或者是攪拌軸彎曲。
    2. Whether there is serious overload. If the mixing shaft of self mixing concrete mixer exceeds the normal working load, the mixing shaft will rotate slowly. If the load is too large, the mixing shaft will stop or the mixing shaft will bend.
    攪拌一體車
    3、攪拌葉片或側葉片與筒體內壁間有沒有大的異物?出現這種情況也會使混凝土自動上料攪拌車攪拌軸停止轉動或轉動緩慢。攪拌葉片或側葉片與罐內壁間有較大的異物也會導致攪拌軸停轉,之所以能卡存異物,就是由于攪拌葉片或側葉片與罐內壁間隙過大造成的,尤其是石子。
    3. Is there any large foreign matter between the mixing blade or side blade and the inner wall of the cylinder? In this case, the mixing shaft of the automatic concrete feeding mixer will stop rotating or rotate slowly. Large foreign matters between the mixing blades or side blades and the inner wall of the tank will also cause the mixing shaft to stop. The reason why foreign matters can be stuck is that the clearance between the mixing blades or side blades and the inner wall of the tank is too large, especially stones.
    攪拌一體車攪拌軸停止轉動的原因已經找到了,下一步就是要及時解決問題了,不要等到小問題拖成大問題,那就真的危害到設備了。關注我們http://www.sarahpalintshirt.com,了解更多相關內容!
    The reason why the mixing shaft of the mixer truck stops rotating has been found. The next step is to solve the problem in time. Don't wait for a small problem to become a big one, which will really harm the equipment. Follow us http://www.sarahpalintshirt.com , learn more about it!

    截屏,微信識別二維碼

    又黄又爽又色两性午夜刺激视频_又爽又黄A片免费观看_又爽又黄又刺激网站在线观看免费_主页