• 您好,歡迎光臨萊州聚峰機械有限公司網站! 主營自動攪拌車,攪拌一體車,自動上料攪拌車等各種規格的產品。

    自動上料攪拌車生產廠家

    點擊撥打服務熱線:4008791999

    您的位置:首頁 - 新聞中心 > 公司新聞 >

    自動上料攪拌車手剎的檢查事項

    發布時間:2022-11-02 來源:http://www.sarahpalintshirt.com/ 瀏覽量:

    概述:自動上料攪拌車手剎的使用率非常高,但手剎的效果會隨使用次數的增加而下降。由于平時保養不當,有時候自動上料攪拌車手剎已經拉上了,卻起
    自動上料攪拌車手剎的使用率非常高,但手剎的效果會隨使用次數的增加而下降。由于平時保養不當,有時候自動上料攪拌車手剎已經拉上了,卻起不到真正制動的作用,這也是車輛安全的重大隱患,所以應該定期對自動上料攪拌車手剎進行維護保養。
    The use rate of the hand brake of the automatic feeding mixer is very high, but the effect of the hand brake will decline with the increase of the use times. Due to improper maintenance at ordinary times, sometimes the hand brake of the automatic feeding mixer has been pulled, but it can not really brake, which is also a major hidden danger of vehicle safety. Therefore, the hand brake of the automatic feeding mixer should be regularly maintained.
    ①進行自動上料攪拌車手剎工作點位置確認
    ① Confirm the position of the manual brake working point of the automatic feeding mixer
    一般來說當自動上料攪拌車手剎手柄拉到整個行程的70%時,自動上料攪拌車手剎系統就應該處于正常的剎車位置。我們在日常使用中,先應該先找出這個剎車工作點,可以通過數棘輪的響聲數量來確定,一般5格到8格之間是正常的剎車位置。
    Generally speaking, when the hand brake handle of the automatic feeding mixer is pulled to 70% of the whole stroke, the hand brake system of the automatic feeding mixer should be in the normal braking position. In daily use, we should first find out the working point of the brake, which can be determined by counting the number of ratchet sounds. Generally, the normal brake position is between 5 and 8 grids.
    自動上料攪拌車
    ②進行剎車效果確認
    ② Confirm the braking effect
    把自動上料攪拌車開到坡度比較大、路面狀況比較好的斜坡上,踩住車輛剎車,掛空擋,將自動上料攪拌車手剎手柄拉到工作點位置。慢慢松開腳剎(注意一定要慢,保證安全),如果自動上料攪拌車沒有發生滑動,就說明自動上料攪拌車手剎的效能良好。
    Drive the automatic feeding mixer to a slope with large gradient and good road condition, step on the vehicle brake, shift to neutral gear, and pull the hand brake handle of the automatic feeding mixer to the working point. Slowly release the foot brake (be careful to be slow to ensure safety). If the automatic feeding mixer does not slide, it means that the hand brake of the automatic feeding mixer is in good performance.
    ③進行自動上料攪拌車手剎的靈敏度測試
    ③ Carry out sensitivity test on hand brake of automatic feeding mixer
    選一段平坦的路面,在路面上慢速行駛,輕輕地提拉手剎手柄,感覺一下自動上料攪拌車手柄的靈敏度和接合點。如果發現自動上料攪拌車手剎的制動效能或靈敏度不夠理想,有經驗的司機可以自行調節手剎的剎車線,也可以將自動上料攪拌車開到就近的維修站,讓維修人員幫忙調整。
    Select a flat road surface, drive slowly on the road surface, gently lift and pull the hand brake handle, and feel the sensitivity and joint point of the handle of the automatic feeding mixer. If it is found that the brake efficiency or sensitivity of the hand brake of the automatic feeding mixer is not ideal, experienced drivers can adjust the brake line of the hand brake by themselves, or they can drive the automatic feeding mixer to the nearest maintenance station for maintenance personnel to help adjust.
    自動上料攪拌車手剎的檢查事項基礎事項就是這樣了,為了各方面的安全您就要多加的了解注意事項,這樣才能更好的去完成工作。更多相關內容就來我們網站http://www.sarahpalintshirt.com進行咨詢吧!
    This is the basic inspection items for the hand brake of the automatic feeding mixer. For the safety of all aspects, you should know more precautions, so that you can better complete the work. More relevant content will come to our website http://www.sarahpalintshirt.com Consult!

    截屏,微信識別二維碼

    又黄又爽又色两性午夜刺激视频_又爽又黄A片免费观看_又爽又黄又刺激网站在线观看免费_主页